![TRIAD BULLPUP CHASSIS for PSA JAKL UPPER RECEIVER TRIAD BULLPUP CHASSIS for PSA JAKL UPPER RECEIVER](https://cdn11.bigcommerce.com/s-iv9a8pp5ge/images/stencil/500x500/products/390/3209/P1013356-Enhanced-NR__07130.1723062165.jpg?c=1)
![TRIAD BULLPUP CHASSIS for PSA JAKL UPPER RECEIVER TRIAD BULLPUP CHASSIS for PSA JAKL UPPER RECEIVER](https://cdn11.bigcommerce.com/s-iv9a8pp5ge/images/stencil/500x500/products/390/3206/P1013357-Enhanced-NR__17957.1723062164.jpg?c=1)
BACK IN STOCK! |
PLEASE READ BEFORE ORDERING- This specific TRIAD kit only works with the Foxtrot Mikes bufferless upper receivers. If you have any other brand of receiver, you will need to get the correct TRIAD kit for that receiver. While the core chassis is the same in all kits, some of the additional components such as buffers and takedown lugs are specific to the upper being used. If you have a Brownells BRN-180 or Palmetto State JAK'L, please purchase our specific chassis for those uppers. Before ordering your TRIAD chassis, please read over our detailed TRIAD INFO FAQ page. This page lists all specs, and answers all of the "how's and why's". It is important to understand the details of each configuration, as well as the legalities, before purchasing your TRIAD pistol or rifle chassis and/or accompanying parts. |
The TRIAD is a Modular Bullpup Chassis, designed to house a standard Mil-spec AR receiver. It also uses a bufferless upper receiver. Once the Mil-spec receiver is installed, the upper receiver simply pins in place just like a standard AR.
Why a Bullpup? Bullpups relocate the trigger and grip forward, greatly reducing the weapon's overall length without reducing the barrel length. This allows a bullpup to be more maneuverable and concealed more easily than a conventional weapon with a similar barrel length. The other main benefit is that it puts the center of mass closer to the shooter's core. This allows more control of the weapon, and much better balance. And if those weren't enough perks, Bullpups also have less muzzle rise, because the recoil impulse is transmitted more directly into the shooter's shoulder. This occurs because the action of the firearm is much closer to the butt plate than on conventional firearms.
One of the main benefits the TRIAD has over other Bullpup designs is the ability to swap barrel lengths and calibers in seconds with a simple upper swap (just like an AR). For example, the user could have 2 different uppers - a 10.5" 300 BLK upper with an optic, and a 16" 5.56 x 45 upper with a scope. The optics remain sighted on both uppers, and the user can swap between the two in less than a minute. There is no limit to this. During testing, we had 6 different uppers of various calibers and barrel lengths that we swapped back and forth. All were complete with optics already sighted in. By changing uppers and magazines in less than a minute, we can swap between 4 different calibers - 5.56x45, 7.62x39, 300BLK, and 9mm.
NOTE: Each brand of upper requires a specific TRIAD kit. While the core chassis is the same in all kits, some of the additional components such as buffers and takedown lugs will be different per kit. We bundle the necessary components in the appropriate kits. If you plan to use multiple uppers, don't worry, we also sell the individual items that make the kits specific. This will allow you to use various uppers on the same TRIAD chassis. These separate parts are available on our Conversion Kits page HERE.
WHAT COMES IN THE KIT AND HOW DOES IT WORK? The TRIAD chassis ships as a partially assembled lower chassis. The front trigger and selector will already be installed, adjusted, and tested for proper operation. The customer removes the left rear part of the chassis and installs a bare Mil-spec AR lower receiver w/trigger and bolt release. Once the linkage is adjusted to the trigger, the chassis half is re-installed. If a pistol chassis was chosen, a rear buffer plug, spacer and buffer cap is then installed. If a rifle chassis is chosen, a rear buffer plug, lower butt-plate mount, and buttplate/buttpad is then installed. Rifle chassis also comes with a rubber cheek riser, and 2" extended buttplate. NOTE: the pistol chassis can accept our butt-plate, if the customer chooses to upgrade at a later time. Buttplate upgrade kits are available HERE. WHAT ELSE DO I NEED TO MAKE A COMPLETE TRIAD FIREARM? You will need a Mil-spec AR lower receiver, an AR bolt catch, and a Foxtrot Mikes bufferless upper receiver. Everything else is provided in the kit. |
Below is a breakdown of the kit components: