MODULAR TELESCOPING BRACE - UNIVERSAL PICATINNY (1913) MOUNT

• MINIMALIST DESIGN WITH ULTRA-COMPACT DIMENSIONS
• ONLY ADDS 2.00" TO OVERALL LENGTH OF FIREARM WHEN COLLAPSED
• LIGHTEST TELESCOPING BRACE IN THE MARKET
• EASY PUSH-BUTTON RELEASE WITH 4 LENGTH SETTINGS
• ON MOST APPLICATIONS, FIREARM CAN BE FIRED WHEN FULLY COLLAPSED
• ENTIRE BRACE CAN BE FLIPPED TO PROVIDE A 1" VERTICAL OFFSET
• CHOICE OF STEADY-BRACE OR GEARHEAD WORKS TAILHOOK BRACE (TAILHOOK AVAILABLE SEPARATELY)

The Modular Telescoping Brace (MTB) is a great alternative to folders, and features minimalist design elements to keep it ultra compact and light. When fully collapsed the stock only adds 2.00" to the overall length of your firearm. With a Picatinny (1913) mounting interface, you can now mount a Telescoping brace to virtually any firearm with a rear Picatinny rail.

Our new and innovative Picatinny mounting interface eliminates the side clamp used by most mounts of this type. By using a small rail insert and two #8 set screws, this interface keeps the overall size of the part more compact. Additionally, it makes a stronger mounting interface and, by using fewer components, it reduces cost and complexity for the end user. The result is a sleek, profiled stock that is easy to mount to any Picatinny rail.

All mounting components are manufactured from 6061 aluminum and we profile all non-stress areas, which keeps weight down without compromising strength. The HD rods used for telescoping the brace are manufactured from sturdy 3/8" 4140 steel and Melonite-coated for ultra wear resistance and rust prevention. When configured with the Polymer Steady-brace, total weight of the entire assembly is only 12.3 ounces.

Use image to the left when calculating Length-of-pull. Measurement is taken from the face of the Picatinny rail to the rearmost portion of the Steady-brace.  Tailhook dimensions are identical to Steady-brace.  7.00" rods yield a 6.75" overall length 8.75" rods yield a 8.50" overall length 9.50" rods yield a 9.25" overall length NOTE: the ATF recommends a Length-of-Pull (LOP) of less than 13.5". LOP is the measurement from the face of the trigger to the rearmost part of the brace. Use the dimensions to the left, combined with measurements from your firearm, to calculate and order the correct length rods.

NFA BRACE DISCLAIMER: The A3 Modular Brace is not designed nor should it be used as a stock or to discharge a firearm from the shoulder. The A3 Modular Brace is to be used as a pistol stabilizing arm brace. You are responsible for the proper and legal use of the A3 Modular Brace at all times. If you have purchased an A3 Modular Brace and wish to utilize the modularity function with parts designed for our Modular Stock, please be aware of all federal, state and local laws and ordinances that you must obey. The National Firearms Act regulates items such as short barreled rifles, and by utilizing components of the A3 Tactical Modular Brace as a firearm stock, you may be subjecting your firearm and yourself to NFA laws and regulations. It is your responsibility to obey all laws and properly register any NFA items you may create with use of A3 Tactical products.