MODULAR FOLDING BRACE - CZ BREN 2

• Modular design for individual personalization
• Folds left or right by simply reversing the hinge
• Offset extension mounts in 4 different configurations
• Positively locks in deployed position and tensioned ramp latch in folded position
• Eliminates "rattle" so common on the factory rear end plate
• Can be configured for the A3 Tactical Steady-brace or Tailhook brace (Tailhook not included)
• Uses our 7.75" extension for a 13.125" Length-of-Pull on the Bren 2 (with Tailhook or Steady-brace)

The A3 Tactical Modular Folding Brace (MFB) compliments the CZ BREN 2 well. The MFB is designed to provide modularity in style, form, and function.  Various configurations are available to personalize the setup, and the modular system components can easily be configured to suit each users unique preferences. With multiple brace options, 2 different extension arms, and the ability to fold right or left, the user has 40 possible variations that can be configured by simply removing a few screws and changing up the configuration.

REAR ADAPTER: Our rear BREN 2 adapter is machined from aluminum and mounts solidly using the rear sling plate mounting hole.  There is a set screw on the bottom t0 allow adjustment for tightening up the gap between the upper and lower receivers.
HINGE: Our proprietary hinge is machined from 4140 steel and can be mounted in the standard configuration to fold left, or upside down to fold right. The hinge utilizes a positive spring-lock for the deployed position, and an easy-release, tensioned ramp detent for the folded position.
EXTENSION ARMS: Our extension arms are available in both straight or offset configurations. Straight extensions simply extend rearward, positioning the brace end in line with the hinge point. Offset extensions offset one end 1.25" from center. Each end is symmetrical, allowing the user to mount it in 4 different positions as shown to the right. These offsets can be used to clear objects such as an ejection port or charging handle, raise/lower a cheek weld for different height optics, or position the brace end higher or lower to suit your shooting preference.
All extension arms incorporate M-LOK slots along the full length of the arm. This allows the user to mount our optional VIS steel QD (Quick-disconnect) sling mount anywhere on the extension.
BRACE OPTIONS:With our modular design, the user has their choice of A3 Tactical Steady-brace (in Polymer or Aluminum), or the Gearhead Works Tailhook (MOD1 or MOD1C). Order Tailhooks HERE.
CHEEK RESTS:  The Xeno Modular Cheek Rest has three heights - 5/8", 7/8", or 1-1/8". The XENO mounts via M-LOK and also has an offset that allows the cheek rest to be positioned 1" offset of the mount, if necessary. The XENO is machined from aluminum with injection-molded Polymer spacers and cheek rest.

NFA BRACE DISCLAIMER: The A3 Modular Brace is not designed nor should it be used as a stock or to discharge a firearm from the shoulder. The A3 Modular Brace is to be used as a pistol stabilizing arm brace. You are responsible for the proper and legal use of the A3 Modular Brace at all times. If you have purchased an A3 Modular Brace and wish to utilize the modularity function with parts designed for our Modular Stock, please be aware of all federal, state and local laws and ordinances that you must obey. The National Firearms Act regulates items such as short barreled rifles, and by utilizing components of the A3 Tactical Modular Brace as a firearm stock, you may be subjecting your firearm and yourself to NFA laws and regulations. It is your responsibility to obey all laws and properly register any NFA items you may create with use of A3 Tactical products.