|
A3 Tactical has teamed up with Foxtrot Mikes to provide custom build combos based around their popular FM-15 bufferless upper receivers. That's right, these upper receivers require no buffer tube! With their rear Picatinny rail (included with your upper receiver), you can easily add one of our Picatinny folding stocks or braces to your AR, keeping the overall firearm much more compact when folded. With the options available below, all you need to do is add your lower receiver and you are good to go! |
 |
NOTE: All NFA rules apply. Any firearm with a stock and a barrel length shorter than 16" creates a Short-barreled rifle which is regulated under the National Firearms Act. If you do not want to create an SBR, but plan to use a barreled upper shorter than 16", please choose a brace instead of a stock when configuring your application.
BUILD OPTIONS:
|
UPPER RECEIVER The Foxtrot Mike Products FM-15 Gen 2 Side Charging AR-15 Upper Receiver features a unique dual spring recoil system nested in the top of the upper receiver allowing the use of a folding stock. This recoil system is paired with a mid-length direct impingement gas system and a proprietary lightweight bolt carrier group for a smooth and reliably functioning rifle. The gas block features an indexing pin and a coil pin to keep it locked in place against the lightweight contoured barrel for an extremely robust system.
|
 |
|
A3 TACTICAL MODULAR STOCK The A3 Tactical stock can be mounted to fold left or right, and latches in both the open and closed positions. The offset extension arms are available in 7.75" or 8.25" lengths. The offset extensions allow the user to configure their stock in 4 different setups. This allows the user to raise or lower their cheek rest, avoid obstacles like side charging handles or ejection ports, and raise or lower the buttplate. All extension arms incorporate M-LOK slots along the full length of the arm. This allows the user to mount a QD (Quick-disconnect) sling mount anywhere on the extension, or any other M-LOK accessory. Our Modular stocks will also accept 2 different cheek risers available HERE. All components are machined from aluminum and anodized low-gloss black. Made in the USA!
|
 |
|
A3 TACTICAL MODULAR BRACE Use these when ordering any upper receiver with a barrel length shorter than 16". The A3 Tactical brace can be mounted to fold left or right, and latches in both the open and closed positions. The offset extension arms are available in 7.75" or 8.625" lengths. The offset extensions allow the user to configure their stock in 4 different setups. This allows the user to raise or lower their cheek rest, avoid obstacles like side charging handles or ejection ports, and raise or lower the buttplate. All extension arms incorporate M-LOK slots along the full length of the arm. This allows the user to mount a QD (Quick-disconnect) sling mount anywhere on the extension, or any other M-LOK accessory. Our Modular braces will also accept 2 different cheek risers available HERE. All components are machined from aluminum and anodized low-gloss black. Made in the USA!
|
 |
|
A3 TACTICAL SKELESTOCK
The A3 Tactical Skelestocks are fixed length folding skeleton stocks machined completely from 6061 aluminum. They are available in two lengths: 9.50" and 11.00". The hinges fold right or left depending on how you mount the hinge. See hinge details below. Each stock comes with a 1/2" polymer cheek rest, 90 durometer Neoprene buttpad, and one steel, full rotation QD lug that can attach in 2 different locations on the right or left of the stock. Additional cheek rests available HERE. |
 |
|
A3 TACTICAL TRIANGLE STOCK Triangle stocks aren't just for AK's. Our new Stock consists of a Doublestar ACE machined aluminum Triangle Stock, our A3 Tactical Modular hinge, and a custom new adapter that allows them to work together. Left-hand fold only. Positively locks in open and folded positions. The ACE Triangle is machined from 6061 aluminum with a textured, non-slip buttplate. It also has a non-rotational QD sling slivel on both sides, just behind the hinge.
|
 |
|
TRIGGER OPTIONS
|
 |
|
RISE ARMAMENT LOWER PARTS KIT The RISE Armament 20-piece AR-15 Lower Parts Kit has all the pieces you need to assemble a lower receiver with quality parts. The Lower Parts Kit features all of the working components of a lower receiver, minus the trigger. It is compatible with mil-spec AR-15s. Most of the mil-spec parts featured in the RISE AR-15 Lower Parts Kit are made of the industry-standard 8620 steel. The 8620 carbon steel is a full-up alloy of nickel, chromium, molybdenum, with 0.2 percent carbon. It machines cleanly and is incredibly tough and strong. These properties make it perfect for the parts in the Lower Parts Kit. Meanwhile, the Safety Detent Pin and the Takedown/Pivot Pin Detents are made of yellow zinc. The pieces in the RISE Lower Parts Kit are highly wear resistant and are able to withstand the wear and tear of continuous shooting. Many of the parts in the RISE Lower Parts Kit feature a black phosphate finish. The black phosphate finish deposits an inert layer on top of the steel to prevent the corrosion reaction from reaching the steel. The black phosphate finish also provides corrosion protection from extended shooting. Black phosphate finishes can be commonly found on drywall screws, frame bolts, and more. But what about what you actually get? Below is a look at the parts in the kit, with the number of parts in parentheses. |
 |
|
GRIPS We have 7 different grip options available for your AR - Magpul MOE, MOE K, MOE K2, Reptilia CQG, HERA, BCM Gunfighter, and the B5 P-grip. |
 |
|
MAGPUL SIGHTS We offer 2 different flip-up sight options - Magpul MBUS polymer sights, and Magpul MBUS PRO steel sights. MBUS - The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection-molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15 / M16 platform. An elevation adjustment tool is included, but most aftermarket A2 front sight adjustment tools may be used as well. The dual aperture MBUS Rear Sight is adjustable for windage. MBUS PRO - The MBUS Pro (Magpul(R) Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size. The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user. |
|
|
MAGAZINES Options include:
|
|
|
FRONT GRIPS
|
|
